Sea to Summit Ether Light XT inflatable pad
The Sea to Summit inflatable Ether Light XT mattress was meant and designed for side sleepers ! Indeed, due to a thicker layer, there is no hip and shoulder contact with the ground. Actually, the independent cell construction provides even dispersion of pressure.
Description
The Sea to Summit Ether Light XT inflatable mattress is designed who are concerned about having a good sleep while having a light mattress. Its main strength is undoubtedly its 10 cm thickness. It allows you to sleep on your side without having the unpleasant feeling of touching the ground with your shoulder or hip.
A comfortable mattress
It is the Air Sprung Cells™ technology (air cells meshed together) that gives this thickness to the mattress. You will thus obtain an even distribution of the pressure of the body for unparalleled comfort. In addition, the PillowLock™ functionality allows you to hang a pillow on a mattress without it slipping, as shown in the video below.
Easy inflation and deflation
In terms of inflation, the Ether Light XT is delivered with a pump bag. As a result, it inflates easily. All you need to do is clip the pump bag to the valve. Then open the bag wide and capture the air. The mattress will inflate quickly without you having to blow it up by mouth. You will therefore not be out of breath, and you will not transfer condensation into the mattress at the same time.
Finally, the valve with non-return valve makes inflation easier, accelerates deflation and will also allow you to fine-tune the amount of air coming out to adjust the degree of firmness of your mattress.
The Sea to Summit Ether Light XT Extreme insulated inflatable mattress:
- A mattress with an R-Value of 1.2 for 2-season use
- An anti-microbial treatment inside the mattress to prevent mould
- A mattress that exists in Insulated and Extreme models for a stronger R-Value
Bonus: find out how to inflate a Sea to Summit mattress with the pump bag below!
Inflating Sea To Summit mattresses :
1. Remove the mattress from the bag
2. Open the base of the bag to remove the pump
3. Connect the nozzle to the mattress valve
4. Inflate the bag by blowing into it at least 30 cm from the opening
5. Roll the bag to push the air into the mattress
- - S: 370g
- - R: 390g
- - L: 500g
– Storage bag acting as an ‘AirStream Pumpsack’ to inflate the mattress: 41 g